By choosing off will leave the computer in the power off state. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. When enabled, the typematic rate and typematic delay can be configured. Former-Sts will restore the system to the status before power failure or interrupt occurs. Install memory module of the same density in pairs, shown in the f ollowing table. Remove the socket protection cap.

Uploader: Tojall
Date Added: 26 October 2012
File Size: 62.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73481
Price: Free* [*Free Regsitration Required]

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system.

May be simultaneously used with other RAID lev els in an array, and allows f or spare disks. Ref ormat the hard driv e. Hard disk can be read and applications bbiostar be used but bioshar from hard disk 2. Confirmation message will be displayed before proceeding. Look for the white triangle on socket, and the gold triangle on CPU should point forwards this white triangle. Dram on-die Termination The Choices: MD drive strength The Choices: This will only apply if passwords are set from the Setup main menu.


Biostar NF AM2 motherboard for PC Gaming by Biostar

JBOD works best if y ou hav e odd sized driv es and y ou want to combine biostr to make one big drive. Reset y our desired password or clear the CMOS data.

Each cat egory includes no, one or more than one setup items. There are three options of Power Management, three of which have fixed mode settings Min.

When enabled, the typematic rate and typematic delay can be configured. If you installed another FDC or the system uses no floppy drive, select disabled in this field.

Per Channel defaultP er CS. Check cable running from disk to disk controller board.

Insert the bootable disk into floppy drive and press Enter. Features and Benefits Drives: System will update BIOS automatically and restart.

Biostar NF550 AM2 motherboard BIOS – 6A61JB07

Keyboard lights Using even pressure on xm2 ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. These locations are reserved in the system BIOS. When you see the following dialog in setup procedure, it means setup is completed.


Try and be nr550 with your scoring and that a 10 should mean the hardware is perfect in all regards and everyone should consider buying it.

All hard disks are capable of breaking down at any time.

Click on the Manual icon to browse for available manual. Power on the system again. It writes data and parity blocks across all the drives in the array.

Power on the AC. When the CPU is over heated, the boostar will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Cannot boot system after installing 1.

Biostar NF AM2 Owner’s Manual |

Call the drive manuf acturers f or compatibility with other drives. Auto defaultMaxMemClk.

Make a bootable floppy disk. Auto defaultNormal, Weak. Re-install applications and data using backup disks. Driv e Strength setting Dram driver biosrar mode The Choices: